Salary AI Book a Demo

Aerospace CNC Machinist/Shift Coordinator Salary in New Jersey

How much does an Aerospace CNC Machinist/Shift Coordinator make in New Jersey? As of September 01, 2026, the average salary for an Aerospace CNC Machinist/Shift Coordinator in New Jersey is $68,281 per year, which breaks down to an hourly rate of $33.

However, an Aerospace CNC Machinist/Shift Coordinator's salary can vary significantly. Here's a look at the typical salary range:

  • Top Earners (90th percentile): $93,539
  • Majority Range (25th-75th percentile): $62,321 to $81,502
  • Entry-Level (10th percentile): $56,896
Salary Factors Salary by Experience Related Job Salaries Top Paying Cities Explore Related Jobs

Check out Aerospace CNC Machinist/Shift Coordinator Job Openings in New Jersey

Key Factors That Influence Aerospace CNC Machinist/Shift Coordinator Salaries

An Aerospace CNC Machinist/Shift Coordinator's salary isn't a fixed number. It's shaped by several important factors. Below, we'll explore how your years of experience, geographic location and company size can directly affect your earning potential.

How Experience Level Affects Aerospace CNC Machinist/Shift Coordinator Salaries?

Experience is a primary driver of an Aerospace CNC Machinist/Shift Coordinator's salary. As you build your skills and take on more complex tasks, your compensation generally increases. Here's how the average salary grows at different career stages:

  • Entry-Level (less than 1 year): $63,891
  • Early Career (1-2 years): $64,088
  • Mid-Level (2-4 years): $64,545
  • Senior-Level (5-8 years): $65,069
  • Expert (over 8 years): $65,894
Job RoleYears of ExperienceAverage Salary
Entry Level Aerospace CNC Machinist/Shift Coordinator less than 1 year $63,891
Early Career Level Aerospace CNC Machinist/Shift Coordinator 1-2 years $64,088
Mid-Level Level Aerospace CNC Machinist/Shift Coordinator 2-4 years $64,545
Senior-Level Level Aerospace CNC Machinist/Shift Coordinator 5-8 years $65,069
Expert Level Aerospace CNC Machinist/Shift Coordinator over 8 years $65,894

How Do Aerospace CNC Machinist/Shift Coordinator Salaries Vary from State to State?

Your salary can change significantly depending on where you work. States with a higher cost of living and strong industrial sectors often pay more to attract Aerospace CNC Machinist/Shift Coordinators. For example, consider the average annual salaries in these key locations:

  • District of Columbia: $69,749.
  • California: $69,484.
  • Massachusetts: $68,558.

Top Paying Cities for Aerospace CNC Machinist/Shift Coordinator

Salaries can also vary between different cities. Major metropolitan areas or cities with a high demand for technicians often offer more competitive pay. Here are a few examples of average annual salaries in different U.S. cities:

  • Maywood: $71,540
  • Teterboro: $71,568
  • Alpine: $71,540

Aerospace CNC Machinist/Shift Coordinator Salary by Industry: Top Paying Sectors

For Aerospace CNC Machinist/Shift Coordinator roles, the industry you choose can affect earning potential by as much as 100% (the gap between the highest and lowest paying industries). Data shows that the Aerospace & Defense and Business Services sectors offer the strongest compensation, at 50% above the average. In contrast, Aerospace CNC Machinist/Shift Coordinator positions in Biotechnology or Transportation typically offer lower base pay, as these industries often view Aerospace CNC Machinist/Shift Coordinator as a support function rather than a direct revenue driver.

The top paying industry for an Aerospace CNC Machinist/Shift Coordinator

Industry Sector Average Annual Salary Average Hourly Rate Pay vs.Avg
Aerospace & Defense $102,421 $49.0 50%

Aerospace CNC Machinist/Shift Coordinator Salary: Hourly Rate, Weekly Pay, and Monthly Pay

Understanding how an Aerospace CNC Machinist/Shift Coordinator's annual salary breaks down can help with budgeting. Below, you can see the average hourly rate, weekly pay, and monthly pay for this role. Use the buttons to switch between different pay periods.

  • Yearly
  • Monthly
  • Weekly
  • Hourly
  • Table View
Last Updated on September 01, 2026
$62,321
Average $68,281/year
$81,502
$5,193
Average $5,690/month
$6,792
$1,198
Average $1,313/week
$1,567
$30
Average $33/hour
$39
Annual Salary Monthly Pay Weekly Pay Hourly Wage
75th Percentile $81,502 $6,792 $1,567 $39
Average $68,281 $5,690 $1,313 $33
25th Percentile $62,321 $5,193 $1,198 $30

Find Your Next Aerospace CNC Machinist/Shift Coordinator Job

Ready to take the next step in your career? Browse thousands of current Aerospace CNC Machinist/Shift Coordinator job openings on our job board. Use the search bar below to find your perfect match.

  • Olson Custom Designs | INDIANAPOLIS, IN

    CNC Machinist Aerospace&amp Medical Manufacturing

    Olson Custom Designs | INDIANAPOLIS, IN

    At a Glance Company: Olson Custom Designs Location: 4825 W 79th St, Indianapolis (New Augusta), IN 46268 Job Type: Full-Time Pay Range: $20.00 – $36.00 per... more

    9 Days Ago

  • Ichor Systems | SANTA CRUZ, CA

    Senior CNC Machinist

    Ichor Systems | SANTA CRUZ, CA

    At a Glance Company: Ichor Systems Location: Scotts Valley, CA (On-site) Address: 175 El Pueblo Road, Scotts Valley, CA 95066 Job Type: Full-Time (Direct H... more

    11 Days Ago

  • Advance CNC Machining | GROVE CITY, OH

    Sales Engineer

    Advance CNC Machining | GROVE CITY, OH

    Advance CNC Machining – Grove City, Ohio $80,000 Base Salary Commission Bonus Are you the person who remembers the details, asks the right questions, and f... more

    10 Days Ago

  • Colinear Aerospace | SPARTA, NJ

    CNC Programmer

    Colinear Aerospace | SPARTA, NJ

    At a Glance Company: Colinear Aerospace Location: Sparta, New Jersey Job Type: Full-Time Pay Range: Competitive / DOE Shift: Day Shift Overtime: As needed ... more

    8 Days Ago

  • Burke Aerospace | FARMINGTON, CT

    CNC Maintenance Technician

    Burke Aerospace | FARMINGTON, CT

    At a glance Company: Burke Aerospace Location: Farmington, CT 06032 Pay: $35-$40 per hour Job type: Full-time Experience: 5 years Why join Burke Aerospace.... more

    10 Days Ago

  • Barber Nichols | ARVADA, CO

    CNC Mill Machinist III

    Barber Nichols | ARVADA, CO

    At a Glance Company: Barber-Nichols Location: Arvada, Colorado (On-site) Job Type: Full-Time Pay Range: $37 – $48 per hour potential bonus Sign-On Bonus: $... more

    9 Days Ago

For Employees

Analyze the market and your qualifications to negotiate your salary with confidence.

Get a Salary Increase

Search thousands of open positions to find your next opportunity.

Search Job Openings

For Employers

Individualize employee pay based on unique job requirements and personal qualifications.

Adjust Employee Salary

Get the latest market price for benchmark jobs and jobs in your industry.

Price My Industry Jobs

Where Does Our Salary Data Come From?

Salary.com salary estimates, histograms, trends, and comparisons are derived from both employer job postings and third-party data sources. We also provide multiple percentiles of salary information for your reference, click here to know Why the Salary Midpoint Formula Is Crucial to Getting Pay Equity Right. With more online, real-time compensation data than any other website, Salary.com helps you determine your exact pay target.

Are you an HR manager or compensation specialist?

Salary.com's CompAnalyst platform offers:

  • Detailed skills and competency reports for specific positions
  • Job and employee pricing reports
  • Compensation data tools, salary structures, surveys and benchmarks.
Learn about CompAnalyst